CROSS FORMA: Service & Maintenance Manual - rev. 2.1
Page 5.2
Power entry module”.
10. Position the mains lead of the machine where it will not be underfoot.
5.2. INSTALLATION
To correctly install the machine, proceed as follows:
1. Ensure that the specifications and requirements for installation have been met (see paragraph
5.1. “Specifications and requirements”).
2. The machine is shipped partially assembled and packed in a carton fixed to a wooden pallet. For
a correct installation please follow the assembling procedure detailed in the user manual.
3. Position the machine as specified above, on a level surface that is free of vibrations and has
sufficient carrying capacity for the combined weight of the machine and user.
4. Connect the mains lead to the power inlet socket on the machine.
5. Place the on/off switch in the “0” position.
6. Plug the mains lead into the wall outlet.
To Next Page
Loading...
