Technogym CROSS FORMA - Machine Configuration Settings; User Menu Configuration Access

CROSS FORMA: Service & Maintenance Manual - rev. 2.1
Page 9.1
9. MACHINE CONFIGURATION
9.1. USER MENU CONFIGURATION
The configuration procedure is invoked when the machine is in standby mode by simultaneously
pressing the keys 369. The following prompt appears on the LED display:
ENTER PASSWORD:
To access the procedure, type in the password 2406 and press ENTER to confirm. At this point the
machine display begins showing the current configuration, structured as in the diagram below:
MENU UTENTE
Language
Pause time
MAX time
Distance
Tgs
Keys
HR
Format P&P
Reset Wellness
Key
Custom mess.
Default config.
SN
9.1.1. LANGUAGE
After selecting a language from the list of those available, all messages subsequently displayed by
the machine will be in the chosen language. To change the selection, when the display shows the
current setting:
LANGUAGE : xxx
Press the +/- GOAL keys to select the desired language from the available options. Press ENTER
to confirm the operation, use the + or – effort level keys to move to the next or preceding parameter.