Technogym CROSS FORMA - Page 44

CROSS FORMA: Service & Maintenance Manual - rev. 2.1
Page 6.10
Error
Cod.
Description Meaning Solution
64
EEPROM Fault.
Corrupt EEPROM.
This happens when the flag relating to the
CURRENT zone and the flag relating to the
MIRROR zone (in EEPROM) indicate results
that are not consistent.
Re-load the braking
table.
128
Not used.
-
Upgrade the Firmware
(FW) on the brake
board. If the same
errors occur after
upgrading has been
successfully
completed, the problem
is NOT the brake
board.