The following procedure applies to all the other machines
Proceeding in the same way, lift the equipment on seat side and insert the swivel castor. Lastly, lift
the equipment again, remove the safety wedges and place the wheels on the oor.
For details, see the following gures:
Fig. 73- For MNLC, MNNC, MNOC machines
Fig. 74- For MNAC , MNBC, MNCC, MNEC, MNFC, MNGC, MNHC, MNIC, MNJC, MNKC, and
MNMC machines
WARNING: Once the equipment has been positioned where it will be used, level it by ad-
justing the height of the equipment feet as described in paragraph “11.3 Levelling the equipment”
SELECTION 700 Technical Service Guide
Rev. 2.0
- 77 -Document uncontrolled when printed
To Next Page
Loading...
