Teknic CLEARPATH-EC - M12 Adapter (Teknic P;N: M12-ENET-CON)

C LEAR P ATH -EC U SER M ANUAL REV 1.11 25
M12 A DAPTER (T EKNIC P/N: M12-ENET-CON)
Each ClearPath-EC motor must be paired with an M12 Adapter. M12
Adapters can be mounted wherever it makes sense to route EtherCAT
network cables and ClearPath-EC motors.
M12 Adapter features
x Provides access to EtherCAT network signals via standard
network patch cables (CAT-5 and above).
x Provides access to the motor's I/O signals via a Molex Mini-Fit
Jr. 8-position connector.
x Supports IP67/66K ingress protection when mounted as
directed.
x Low-cost, passive component device.
ClearPath-EC M12 Adapter (P/N: M12-ENET-CON)
The M12 Adapter includes multi-point sealing features as shown below. It
can be easily mounted through a bulkhead wall such that IP67/66K
compliance is maintained.
M12 Adapter sealing features for mounting to a sealed bulkhead
T
EKNIC , I NC . T EL . (585) 784-7454