Teknic CLEARPATH-EC - Power4-Strip-S

C LEAR P ATH -EC U SER M ANUAL REV 1.11 84
POWER4-STRIP-S
DC Bus Motor Power (Input from DC Bus Motor Supply)
Nominal voltage range 24VDC to 75VDC
Max. input voltage 100VDC
Max. continuous current 20A
Peak current (3 seconds) 50A
Connectors 2-pin Molex Sabre (P1, P2)
DC Bus Motor Power (Output to ClearPath motors)
Max. motors 4
Max. continuous current 10A
Peak current (3 seconds) 20A
Connectors 4-pin Molex MiniFit Jr. (P1, P2, P3, P4)
Environmental
Operating temperature** -40°C to +70°C
Long term storage temperature -40°C to +50°C
Pollution Degree 2
Dielectric Withstand Voltage
Between DC Bus and chassis plate 1,600 VDC
Dimensions
L x W x H (w/o baseplate) 3.37" x 2.23" x 0.67"
L x W x H (with baseplate) 3.62" x 2.35" x 1.03"
Country of Origin USA
Warranty 1 year
**For operation over 40°C refer to power derating curves in this manual
T
EKNIC , I NC . T EL . (585) 784-7454