Tektronix 2232 User Manual

Setup Menus
Average - Reduces the amount random signal noise displayed by
weighted average of signal samples.
Accpeak (Accumulate Peak) - Accumulates signal peaks over multiple
acquisitions.
Sample - Samples the signal at 100 Mslsec (megasamples per second)
but, unlike the other acquisition modes, does not do any digital signal
processing.
Roll l Scan
Roll - Continuously acquires and displays waveform data. The acquisition
appears to "roll" from right to left across the display. (Roll is only available for
settings of 0.1 s to
5 s.)
Scan - Updates the acquisition record left to right across the display at the
rate set by the
seconds/division control. (Scan is only available for settings
of 0.1 s to
5 s.)
Ext Clock
(External Clock) - Selects the slow (Roll/Scan) mode or Fast (Record)
mode for an external (acquisition) clock signal applied to the auxiliary con-
nector on the left side of the instrument.
Reset Default Acq Modes
(Reset Default Acquisition Modes) - Resets the Acquisition Menu selections
to factory default conditions.
Cursor Knob Func
(Cursor Knob Function) - Selects the menu item value to set with the
CURSORS control.
Trig POS (Trigger Position) - Sets the number of points acquired prior to
the trigger.
Avg Wgt (Average Weight) -Weights the last sample in the Average ac-
quisition mode from
111 to 11256.
Swp Lim (Sweep Limit) - Selects the number of acquisitions to make
before halting; 1 to 999,000 or
NO LIMIT.
2232 User Manual 2-27

Tektronix 2232 Specifications

General

Brand	Tektronix
Model	2232
Category	Test Equipment
Language	English