Tektronix TDS5000B Series

Table of Contents
vi
TDS5000B Series Service Manual
List of Tables
Table 2--1: Additional accessory connection information 2--2.........
Table 5 --1: Calibration required for module replaced 5--1...........
Table 5 --2: Required equipment and materials 5--2.................
Table 5--3: GPIB devices required by test program 5--5.............
Table 5--4: CALibrate commands 5--7............................
Table 5 --5: DIAgnostic Commands 5--19............................
Table 6--1: External inspection check list 6--3......................
Table 6--2: Internal inspection check list 6--4......................
Table 6--3: Tools required for module removal 6--8.................
Table 6--4: Failure symptoms and possible causes 6--49...............
Table 6 --5: Power supply voltages 6--54............................
Table 6--6: Acquisition board voltages 6--54........................
Table 6--7: Power-on diagnostic tests 6--56.........................
Table 6 --8: Action required for module replaced 6--59................
Table 6--9: BIOS Error messages 6--60............................
Table 6--10: Beep codes 6--62.....................................
Table 7--1: Instrument options 7--1...............................
Table 7 --2: Instrument upgrades 7--2.............................
Table 7--3: Standard accessories 7--3.............................
Table 7--4: Optional accessories 7--4..............................