TDS5000B Series Service Manual
7-1
Options and Accessories
This section lists the standard and optional accessories available for the
TDS5000B Series oscilloscopes, as well as the product options.
Options
You can order the options shown in Table 7--1 with the oscilloscope.
Table 7- 1: Instrument options
Hardware options
18 Touch-screen interface
1P Built--in thermal printer
FHD Front panel removable hard drive
SM Serial communi cations mask testing
Acquisition mem ory options
3M 16M/8M/4M on 1/2/4 channels
Mounting options
1K K420 oscilloscope cart with mouse accessory tray
1R Rackmount kit
Software options
DVD TDSDVD—Optical storage analysis software
J2 TDSDDM2—Disk drive measurements software
J3E TDSJIT3E—Jitter and timing analysis software
essentials
JT3 TDSJIT3—Jitter & timing analysis with Rj/Dj and
BER est imation
PW3 TDSPWR3—Power measurement software
USB TDSUSBS—USB2.0 compliance test software only
CP2 TDSCPM2—ANSI/ITU telecom pulse compliance
software
ET3 TDSET3—Ethernet compliance test software
Power cord options
A0 North American
A1 Universal European power cord (220 V, 50 Hz)
A2 UK power cord (240 V, 50 Hz)
To Next Page
Loading...
Need help?
General
