Commands
TDS5000B Series Service Manual
5-23
DIAg:ITEM:FAILURES? 2
This query might return
:DIAG:ITEM:FAILURES 2,0
This indicates there were 0 failures for item 2.
DIAg:ITEM:NAMe?
This query-only command returns the name of the selected menu item. This
command is equivalent to selecting Instrument Diagnostics from the Utilities
menu and then reviewing the S ubsystem, Area and Test settings.
This query can be issued while diagnostics are still in progress.
DIAg:ITEM?, DIAg:ITEM:FAILURES?, DIAg:ITEM:RESULT?,
DIAg:ITEM:SUBITEMS?
DIAg:ITEM:NAMe? <NR1>
<NR1> sets the index item about which data will be returned, which ranges from
0 through 15.
DIAg:ITEM:NAMe? 2
This query might return
:DIAG:ITEM:NAME 2,“Acquisition”
This indicates that the selected menu item (2) is Acquisition.
DIAg:ITEM:RESULT?
This query-only command returns the result from the last execution of the item.
This command is equivalent to selecting Instrument Diagnostics from the
Utilities menu and then reviewing the Diagnostic Status.
This query can be issued while diagnostics are still in progress.
DIAg:ITEM?, DIAg:ITEM:NAMe?, DIAg:ITEM:FAILURES?,
DIAg:ITEM:SUBITEMS?
Example
Related C ommands
Syntax
Arguments
Example
Related C ommands
To Next Page
Loading...
