The calculator is a very common object and still indispensable for many different and complex
measurements. As it is important to be able to work with the measured values without the
need to save them on a device or to write them down on paper, a Calculator mode has been
integrated into the MICRO-HITE or MICRO-HITE+M for more ease of use during the
measurement process.
This mode is accessible from the main menu by activating the key at any moment.
The concept of this mode is based on the fact that the user has the possibility either to use it
as a standard feature, meaning that the user can manually enter the values that will be used
during a calculation or also re-use one or several results of previous measurements (blocks
of list).
The mode is presented in the form of a software page split into two distinct parts defined by
their function. The zone on the left defines the measurements list. The right zone allows you
to enter values and a measurement function.
To Next Page
Loading...
Need help?
General
