TESA MICRO-HITE+M User Manual

Instruction manual for MH & MH+M
52
• Diameter
The main value is the diameter of the element (for further details, see
this chapter).
• Midpoint & diameter
The main value is the midpoint of the centre of the element (for further
details, see this chapter). However, two independent blocks will be
created automatically at the end of the measurement history. These
two blocks will store the midpoint value as well as the diameter of the
element.
• Diameter & midpoint
The main value is the diameter of the element (for further details, see
this chapter). However, two independent blocks will be created
automatically at the end of the measurement history. These two
blocks will store the midpoint value as well as the diameter of the
element.
9.5 Input/Outputs
All data output (send to USB,…) management can be done:
• Automatic

TESA MICRO-HITE+M Specifications

General

Brand	TESA
Model	MICRO-HITE+M
Category	Measuring Instruments
Language	English