TESA MICRO-HITE+M User Manual

Instruction manual for MH & MH+M
138
21.4 Transmission via
TLC (cable)
Sending data via the TLC port to a computer requires the use of a data transmission cable
type TLC-USB (TESA reference: 04760181). This cable has a length of 2 meters.
The use of such a cable requires the prior installation of a driver on your
computer.
For further information, please refer to the instruction manual provided with
the cable or contact your local reseller.
Once the cable is correctly connected at the back of your panel and to your computer, there
are several ways to manage the data: by using additional software such as TESA STAT-
EXPRESS or TESA DATA-DIRECT or simply by sending the data to your computer via an
application type HyperTerminal. For further information, please contact your local reseller.
The connection data is:
Data rate
4800
Parity
Even
Data bits
7
Stop bits
2

TESA MICRO-HITE+M Specifications

General

Brand	TESA
Model	MICRO-HITE+M
Category	Measuring Instruments
Language	English