Instruction manual for MH & MH+M
136
21 DATA MANAGEMENT
Your control panel offers the possibility to manage measurement data by sending it to
several different peripherals. Each one of these processes is independent from the others.
Therefore, each one of the possibilities can be enabled and used at the same time as the
others. All combinations are possible. You could for example store your data on a USB key
and, at the same time as sending results to a computer via the TLC connector.
It is not possible to connect the control panel directly to the local network of
a company. The only possible solution is to send data to a computer, which
is itself connected to the intranet.
Data management parameters are accessible via the key of the main page that you can
access at any time by pressing the key of your control panel.
Main page
Parameters for data management
21.2 Automatic or
manual
transmission
Each data management is independent from the others. Therefore, if you choose an option
(for example sending data to a USB key), you will have the following possibilities:
To Next Page
Loading...
Need help?
General
