On the MICRO-HITE+M models, a rotary control handle (FEEL&MOOVE patented system) is
located close to the instrument base. It serves for guiding the instrument when it is moved on
the air cushion and for starting the fast displacement of the probe as well as for triggering all
main measuring functions (up or down probing, bore or shaft measurement).
The height gauge is very user-friendly with easy and precise handling. Any fast displacement,
slow approach to the point to be measured, probing up and down or bore measurement can
be carried out using this rotary control handle.
To Next Page
Loading...
Need help?
General
