TESA MICRO-HITE+M User Manual

Instruction manual for MH & MH+M
156
7. Once you have chosen your version, click on the button “Update”. The software will be
installed (this can take several minutes) and then warn you that the control panel will
automatically shut down.
8. Wait until the control panel is automatically turned off then manually turn it on again.
9. You can now use your height gauge.
Each software version (loaded onto your control panel) is linked to firmware
versions used in the electronic cards that are part of your height gauge.
When you update your height gauge with a new software version, make sure
that the electronic cards do not have to be updated as well, by contacting
your local reseller.

TESA MICRO-HITE+M Specifications

General

Brand	TESA
Model	MICRO-HITE+M
Category	Measuring Instruments
Language	English