TESTO 350 User Manual

10
> At the end of its life cycle, send the product to the separate
collection for electric and electronic devices (observe local
regulations), or return the product to testo for disposal.
3 Specifications
3.1. Use
The testo 350 is a portable combustion & emission analyzer. The
instrument consists of the control unit (control unit for displaying
readings and controlling the analyzer box) and the analyzer box
(measuring instrument). Plug-type contacts, databus cable or
Bluetooth (option) are used to connect the control unit to the
analyzer box.
The testo 350 has been designed for the following
tasks/applications:
• Service/adjustment of industrial boilers and systems
(processing plants, power plants)
• Emission control troubleshooting of compliance measurements
with emission guidelines
• Service/commissioning of burners/boilers
• Measurements on gas turbines/stationary industrial engines
• testo 350 must not be used as a safety (alarm) device
The Bluetooth option may only be operated in countries in which it
is type approved.
3.2. Technical data
3.2.1. Examinations and licenses
As declared in the certificate of conformity, this product complies
with Directive 2004/108/EC.
This product is TÜV approved.
3.2.2. Bluetooth module (option)
• Bluetooth type: BlueGiga WT 11
• Bluetooth product note: WT 11
w ww . . co m
information@itm.com1.800.561.8187

TESTO 350 Specifications

General

Measurement Parameters	O2, CO, NO, NO2, SO2, H2S, CO2, CxHy, H2, Temperature, Draft, Pressure
O2 measurement range	0 to 25 vol. %
CO measurement range	0 to 10, 000 ppm
SO2 measurement range	0 to 5, 000 ppm
Resolution H2	1 ppm
Accuracy O2	±0.2 vol. %
Display	Graphic display
Communication	USB, Bluetooth
Power Supply	Rechargeable battery
Operating Temperature	-5 to 45 °C
Accuracy CO	±5 ppm or ±5% of measured value
Accuracy NO	±5 ppm or ±5% of measured value
Accuracy NO2	±5 ppm or ±5% of measured value
Accuracy SO2	±5 ppm or ±5% of measured value
Accuracy H2S	±5 ppm or ±5% of measured value
Accuracy H2	±5 ppm or ±5% of measured value
Draft measurement range	-99.9 to +99.9 hPa