TESTO 350 - Date;Time; Power Options; Display Brightness

54
6.1.2.4. Date/time
This function is available in both the analyzer box and the control
unit. Changes are accepted for the control unit and for the analyzer
box.
Date, time mode and time can be set.
Activating the function:
> [
] → Device Settings → [OK] → Date/Time → [OK]
Set date/time
1. Select parameter: [◄], [▲], [▼] → [Edit].
2. Set parameter: [▲], [▼] and partly [◄], [►]→ [OK].
3. Save changes: [Save].
6.1.2.5. Power options
This function is available in both the analyzer box and the control
unit. Changes are accepted by the control unit and the analyzer
box.
Automatic instrument shut-down (Auto-Off) and switching off of the
display light in battery operation can be set.
Activating the function:
> [ ] → Device settings → [OK] → Power Options → [OK]
Making settings:
1. Select function or parameter: [▲], [▼] → [Change]
2. Set parameter: [▲], [▼] and partly [◄], [►] → [OK].
3. Save changes: [Finished]
6.1.2.6. Display brightness
This function is available in both the analyzer box and the control
unit. Changes are accepted for the control unit and for the analyzer
box.
The intensity of the display illumination can be set.
Calling up the function:
> [ ] → Device Settings → [OK] → Display Brightness →
[OK]
Performing settings
> Set parameter: [◄], [►]→ [OK].
w ww . . co m
information@itm.com1.800.561.8187