56
Switching Bluetooth on / off
1. [Change].
2. Select setting: [
], [ ] → [OK].
3. Confirm the entry: [Finished].
6.1.2.9. Language
This function is available in both the analyzer box and the control
unit. Changes are accepted for the control unit and for the analyzer
box.
The menu language can be set. The number of available
languages depends on the activated country version, see Country
version, page 56.
Activating the function:
> [
] → Device settings → [OK] → Language → [OK]
Activate the language:
> Select the language → [OK].
6.1.2.10. Country version
This function is available in both the analyzer box and the control
unit. Changes are accepted for the control unit and for the analyzer
box.
The country version can be set. The selection of the country
version influences the menu languages that can be activated.
Please make sure that the correct country version has been set.
By changing the country version the bases of calculation and thus
the displayed measurement parameters, fuels, fuel parameters and
calculation formulas may change.
Information concerning assignment table, basis of calculation and
country version see www.testo.com/download-center (registration
required).
If several components with different country versions are
connected, the components will automatically change to the
country version of the control unit when the control unit is
connected.
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
