TESTO 350 - Fuels & Test Option; Sensor Settings

59
6.1.3. Fuels & Test option
The fuel can be selected. Fuel-specific coefficients can be set.
Besides the already pre-configured fuels, up to 5 more fuels can be
configured in a customized way (i.e. with the testo easyEmission
software). Fuel parameter, see www.testo.com/download-center
(registration required).
In order to maintain the measuring accuracy of the
instrument one must choose or configure the correct fuel.
Activating the function:
> [ ] → Fuels & Test option → [OK].
Activating fuels:
> Select the fuel → [OK].
- The fuel is activated and the main menu is opened.
Setting coefficients:
1.Select the fuel → [Coeff.].
2. Select the coefficients: [Change].
Possibly:
> Enter the password: [Enter] → [Next] → [OK].
3. Set values → [OK].
4. Save changes: [Finished].
6.1.4. Sensor settings
An NO
2
addition and shut-down thresholds to protect the sensors
can be set.
Activating the function:
> [
] → Sensor settings → [OK]
w ww . . co m
information@itm.com1.800.561.8187