TESTO 350 - Smoke Number; Gas Flow Calc

75
measured flue gas temperature (FT) helps when positioning the
probe.
- The reading is displayed.
3. Quit measurement [
].
- The reading is maintained.
Options:
> [Options] → Save: The readings are saved in a record.
> [Options] → Print: The readings from a record are printed.
> [Options] → Show Graphic: The readings are displayed in
form of a line graph.
> [Options] → Configure Graphic: The measurement
parameters to be represented (max. 4) can be displayed ( ) or
hidden ( ).
6.2.3.3. Smoke number
Activating the function:
> Measurement Type → Smoke number → [OK].
Determine smoke pump no./smoke nos./oil deposits with the smoke
pump and enter manually:
The function is only available if the chosen fuel is an oil.
1. Select parameter → [Change].
2. Enter data or values → [Next] or [OK].
Enter the boiler H2O temperature:
> Boiler H2O Temp → [Change] → Enter value → [OK].
Options
> [Options] → Reset values: The entered values are deleted.
> [Options] → Save: The readings are saved in a record.
> [Options] → Print: The readings from a record are printed.
6.2.3.4. Gas flow calc.
The function Gas flow calc. is only available if the activated fuel is
a gas.
w ww . . co m
information@itm.com1.800.561.8187