TESTO 350 User Manual

91
7.11.4. Replacing the motor of the condensate pump
The condensate pump is only available in instruments with
the gas preparation (GP) option.
1. Unlock and remove the cover.
2. Unlock the two lateral clip locks of the condensate pump and
pull off the pump head.
3.Pull the inlet and outlet hoses off the sockets on the analyzer
box.
w ww . . co m
information@itm.com1.800.561.8187

TESTO 350 Specifications

General

Measurement Parameters	O2, CO, NO, NO2, SO2, H2S, CO2, CxHy, H2, Temperature, Draft, Pressure
O2 measurement range	0 to 25 vol. %
CO measurement range	0 to 10, 000 ppm
SO2 measurement range	0 to 5, 000 ppm
Resolution H2	1 ppm
Accuracy O2	±0.2 vol. %
Display	Graphic display
Communication	USB, Bluetooth
Power Supply	Rechargeable battery
Operating Temperature	-5 to 45 °C
Accuracy CO	±5 ppm or ±5% of measured value
Accuracy NO	±5 ppm or ±5% of measured value
Accuracy NO2	±5 ppm or ±5% of measured value
Accuracy SO2	±5 ppm or ±5% of measured value
Accuracy H2S	±5 ppm or ±5% of measured value
Accuracy H2	±5 ppm or ±5% of measured value
Draft measurement range	-99.9 to +99.9 hPa