43
5.2.11. Switching off
Unsaved readings will be lost when the analyzer is
switched off.
Rinse phase
When switched off, the analyzer box checks whether flue gases are
still in the sensors. The sensors are rinsed with fresh air, if this
should be necessary. The duration of the rinse phase depends on
the gas concentration in the sensors.
> press [
].
- The rinse phase starts.
- The flue gas analyzer switches off. It is normal for the fan of the
analyzer box to run on for a while.
5.3. Folders / Measurement sites
(only available via Measuring/Analyzer Box tab)
All readings can be saved under the currently active measurement
site. Readings not yet saved are lost when the measuring
instrument is switched off.
Folders and measurement sites can be created, edited, copied and
activated. Folders and measurement sites (incl. protocols) can be
deleted.
Calling up the function:
> [
] → Folders → [OK].
Changing the display:
> Toggle between overview (display of number of measurement
sites per folder) and detailed view (display of all measurement
sites per folder): [Overview] or [Details].
Activating a measurement site:
> Select the measurement site → [OK].
- The measurement site is activated and the menu Measurement
Options is opened.
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
