TESTO 350 - Instrument Diagnosis

47
Display record:
1. Choose the desired record from the detailed view.
2. [Data].
Options
> [Options] → [Delete All Measurements]: The readings of all
measurement sites will be deleted.
> [Options] → [Copy All Measurements]: The readings of all
measurement sites will be copied.
Analyzer box options
> [Options] → Print Data: Transmit data of the chosen record to
a record printer.
> [Options] → Copy Record: Copy record into the record log of
the Control unit.
> [Options] → Delete Record: Delete the chosen record.
> [Options] → Show Graphic: Display saved record data as
graphic.
> [Options] → Number of lines: Change the number of
measuring values per display page.
> [Options] → Delete All Measurements: Delete all saved
measurements for a measurement site.
> [Options] → Copy All Measurements: Copy all
measurements of a measurement site into the record log of the
Control unit.
Control unit options
> [Options] → Delete All Measurements: Delete all saved
measurements for a measurement site.
5.5. Instrument diagnosis
Important operating values and instrument data are displayed. A
gas path check can be carried out. The status of the sensors and
any device errors not yet rectified are displayed.
Activating the function:
> [
] → Instrument diagnosis → [OK].
or
> [ i ].
w ww . . co m
information@itm.com1.800.561.8187