101
Description Article no.
Service adapter 0554 1205
Carrying strap 0554 3147
Analog output box 0554 0845
Cable with adapter for cigarette lighter and adapter
for connection to analyzer box
0554 1336
Cable with battery terminals and adapter for
connection to analyzer box
0554 1337
Hose set for flue gas discharge 0554 3149
Wall bracket for analyzer 0554 0203
USB cable to connect the PC to the analyzer 0449 0073
Data bus connecting plug 0554 0119
Data bus line 5 ft. 0449 0075
Data bus line 6 ft. 0449 0076
Data bus line 65 ft. 0449 0077
Connecting cable analog output box 0449 0086
Connecting cable data bus adapter 0449 0087
ISO calibration certificate 0520 0003
For a complete list of all accessories and spare parts, please refer
to the product catalogues and brochures or look up our website
www.testo.com
8.3. Updating the instrument software
Under www.testo.com/download-center you can download the
current instrument software (Firmware) for testo 350 (registration
required).
Control unit and analyzer box must be separated for
updating the instrument software.
Before the firmware update is started, the control unit's
rechargeable battery must be fully charged. If the battery is
not fully charged, this will affect the firmware update. The
analyzer must then be sent in to testo service.
Once the instrument software has been updated, the
descriptions in the operating instructions will no longer matc
the instrument functions. For the latest version of the
operating instructions, visit www.testo.com\download-center
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
