93
7.12. Replacing the filtration non-woven in the gas
cooler
The filtration non-woven is included in the filter set
0554 3381.
✓ The analyzer box must be switched off and isolated from the
mains supply.
1. Unlock the condensate trap and pull it vertically off the
measuring box.
2. Pull off the hose.
3. Open the cover of the filtration non-woven in anti-clockwise
direction.
4. Replace the exhausted filter with a new filtration non-woven.
5. Close the cover.
6. Plug on the hose.
7. Plug the condensate container on the measuring box.
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
