46
Other folder options:
• Edit Folder: Make changes to an existing folder.
• Copy Folder: Make a copy of an existing folder.
• Delete Folder: Delete an existing folder, including the
measurement sites created therein.
• Delete All Folders: Delete all existing folders, including the
measurement sites created therein.
5.4. Saved Measurements
Analyzer box
Measurement data are always saved in a measurement record in
the analyzer box with which the measurement data were
measured.
An overview with all created folders and measurement sites is
displayed. The measurements saved for the corresponding
measurement sites are displayed. Measurements can be displayed,
printed, deleted and copied to the control unit.
Control unit
Measurement sites cannot be saved in the control unit.
Measurements saved in the analyzer box can be copied to the
control unit, i.e. to be able to transport these for evaluation by PC
software, while the analyzer box remains at the measurement site.
For easy assignment the measurements are saved under the serial
number of the analyzer box. The data (folders, measurement sites,
readings) contained in these measurements are displayed like in
the analyzer box.
Activating the function:
> [
] → Saved measurements → [OK].
> only with control unit tab: Choose the serial number of the
analyzer box → [OK].
Changing the display:
> Toggle between overview (display of number of measurement
sites per folder) and detailed view (display of all measurement
sites per folder): [Overview] or [Details].
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
