Thermo 48i - Page 134

Operation
Service Menu
3-112 Model 48i Instruction Manual Thermo Electron Corporation
• In the Main Menu, choose Service > Multipoint Cal > Choose Cal Point
> Coefficients.
• Press to recalculate the coefficients.
• Press to return to the Multipoint menu or to return to
the Run screen.
Default Coefficients The Default Coefficients screen allows the user to view and reset the
calibration coefficients to default values.
• In the Main Menu, choose Service > Multipoint Cal > Choose Cal Point
> Coefficients.
• Press to recalculate the coefficients.
• Press to return to the Multipoint menu or to return to
the Run screen.
XXLO WCONCENTRATIONXXLO W
CO 15.80 PPM
SAMPLE 12:34 ALARMX
COEFFICIENTS:
1: 1.000000
2: 1.000000
3: 1.000000


 RECALCULATE?
RANGE AVG DIAGS ALARM