Thermo 48i - Page 58

Operation
Instrument Controls Menu
3-36 Model 48i Instruction Manual Thermo Electron Corporation
• Press to return to the Datalogging Settings menu or to
return to the Run screen.
Concentrations The Concentrations screen allows the user to select the output signal that is
tied to the selected field item. The selected item is shown by “<--” after it.
• In the Main Menu, choose Instrument Controls > Datalogging Settings
> Select Content > Select Field > Concentrations.
• Use and to move the cursor up and down.
• Press to select a new choice.
• Press to return to the Choose Item Type submenu or to
return to the Run screen.
XXLO WCONCENTRATIONXXLO W
CO 15.80 PPM
SAMPLE 12:34 ALARMx
DATA IN SREC FIELD 1:
CONCENTRATIONS
OTHER MEASUREMENTS
ANALOG INPUTS
RANGE AVG DIAGS ALARM
XXLO WCONCENTRATIONXXLO W
CO 15.80 PPM
SAMPLE 12:34 ALARMx
CONCENTRATIONS:
>NONE
CO <--
RANGE STATUS
RANGE AVG DIAGS ALARM