Thermo 48i - Page 59

Operation
Instrument Controls Menu
Thermo Electron Corporation Model 48i Instruction Manual 3-37
Other Measurements The Other Measurements screen allows the user to select the output signal
that is tied to the selected field item. The selected item is shown by “<--”
after it.
• In the Main Menu, choose Instrument Controls > Datalogging Settings
> Select Content > Select Field > Other Measurements.
• Use and to move the cursor up and down.
• Press to select a new choice.
• Press to return to the Choose Item Type submenu or to
return to the Run screen.
Analog Inputs The Analog Inputs screen allows the user to select the output signal that is
tied to the selected streaming data item. The selected item is shown by “<--”
after it.
• In the Main Menu, choose Instrument Controls > Datalogging Settings
> Select Content > Select Field > Analog Inputs.
• Use and to move the cursor up and down.
• Press to select a new choice.
• Press to return to the Choose Item Type submenu or to
return to the Run screen.
XXLO WCONCENTRATIONXXLO W
CO 15.80 PPM
SAMPLE 12:34 ALARMx
OTHER MEASUREMENTS:
>NONE
S/R <--
INTERNAL TEMP
CHAMBER TEMP
CHAMBER PRES
SAMPLE FLOW
INTENSITY
ª
RANGE AVG DIAGS ALARM
MOTOR SPEED