Thermo 48i - Page 74

Operation
Instrument Controls Menu
3-52 Model 48i Instruction Manual Thermo Electron Corporation
Gateway The Gateway screen is used to edit the gateway address.
• In the Main Menu, choose Instrument Controls > Communication
Settings > TCP/IP Settings > Gateway.
• Use , , and to move and change the value of
the gateway address.
•Press to save the new address.
• Press to return to the TCP/IP Settings menu or to return
to the Run screen.
Host Name The host name screen is used to edit the host name. When DHCP is
enabled, this name is reported to the DHCP server.
X WCONCENTRATION W
CO 15.80 PPM
SAMPLE 12:34 ALARMx
NETMASK:
CURRENT: 255.255.255.000
SET TO: 255.255.255.000
§¨ MOVE CURSOR
©ª CHANGE VALUE


 SAVE
RANGE AVG DIAGS ALARM
X WCONCENTRATION W
CO 15.80 PPM
SAMPLE 12:34 ALARMx
GATEWAY:
CURRENT: 000.000.000.000
SET TO: 192.168.001.001
§¨ MOVE CURSOR
©ª CHANGE VALUE


 SAVE
RANGE AVG DIAGS ALARM