Thermo 48i - Page 73

Operation
Instrument Controls Menu
Thermo Electron Corporation Model 48i Instruction Manual 3-51
• Use , , and to move and change the value of
the IP address.
•Press to save the new address.
• Press to return to the TCP/IP Settings menu or to return
to the Run screen.
Netmask The Netmask screen is used to edit the netmask.
• In the Main Menu, choose Instrument Controls > Communication
Settings > TCP/IP Settings > Netmask.
• Use , , and to move and change the value of
the netmask.
•Press to save the new netmask.
• Press to return to the TCP/IP Settings menu or to return
to the Run screen.
X CONCENTRATION W
CO 15.80 PPM
SAMPLE 12:34 ALARMx
IP ADDRESS:
CURRENT: 192.168.001.015
SET TO: 192.168.001.015
§¨ MOVE CURSOR
©ª CHANGE VALUE


 SAVE
RANGE AVG DIAGS ALARM