Thermo 48i - Page 72

Operation
Instrument Controls Menu
3-50 Model 48i Instruction Manual Thermo Electron Corporation
Use DHCP The Use DHCP screen is used to specify whether to use DHCP or not.
• In the Main Menu, choose Instrument Controls > Communication
Settings > TCP/IP Settings > Use DCHP.
•Press to toggle and set DHCP on or off.
• Press to return to the TCP/IP Settings menu or to return
to the Run screen.
IP Address The IP Address is used to edit the IP address.
• In the Main Menu, choose Instrument Controls > Communication
Settings > TCP/IP Settings > IP Address.
XXLO WCONCENTRATIONXXLO W
CO 15.80 PPM
SAMPLE 12:34 ALARMx
TCP/IP SETTINGS:
>USE DHCP OFF
IP ADDRESS 192.168.1.15
NETMASK 255.255.255.0
GATEWAY 192.168.1.1
HOST NAME
RANGE AVG DIAGS ALARM
XXLO WCONCENTRATIONXXLO W
CO 15.80 PPM
SAMPLE 12:34 ALARMx
DHCP:
CURRENTLY: OFF
SET TO: ON ?


 TOGGLE VALUE
CYCLE POWER TO CHANGE DHCP
RANGE AVG DIAGS ALARM