Redstone™ Optical Spectrum Analyzer Chapter 9: Settings
Rev C, January 21, 2022 Page 64
If the check box “Activate Persistence” is checked, the display will also display the last few
spectra/interferograms acquired in a more faded nuance.
Note: Enabling persistence might severely slow down the update rate of the screen.
Figure 66. Display Settings Page
9.1.3. Peak Track Settings
The automatic Peak Track routine uses a number of parameters for finding peaks in the spectra. These options
are the same as can be specified in the options panel for the Peak Track analysis tool (see Section 8.9.6 Peak
Track).
.
Figure 67. Peak Track Settings Page