TOMARK Viper SD-4 RTC - Page 37

TOMARK, s.r.o.
Airplane Maintenance Manual
Chapter 05 Inspection and Maintenance
Issue: 04.APR 2016 Page 37
Scheduled Inspection
(50 h)
100 h/
annual
as
specified
Check the tightening of the bolts and their locking.
○
○
Check the attachment of the legs to the aeroplane’s fuselage
for possible play by moving a leg forward and backward, up
and down. If play is found, tighten the leg attachment bolts.
○
Main Landing Gear Wheels and Tires
Demount the main wheel fairings.
○
Visually check the main wheel fairings for cracks and other
damage
○
Inspect tires for cracks, cuts and condition.
○
○
Check the attachment of the wheel disks and their locking.
○
○
Visually check the wheel disks for cracks and deformities.
○
Check the condition of the valve at the opening of the rim.
○
Inspect slip marks for proper alignment.
○
○
Check the play in the bearings and the free turning of the
wheels.
○
Brakes
Inspect brake cylinder in the cockpit for leakage, damage and
attachment.
○
○
Inspect brake disc and linings for wear and cracks, replace as
required.
○
○
Inspect wheel brake caliper and pistons for damage wear,
leakage and cleanliness.
○
○
Check brake lines and hoses for proper routing and
attachment.
○
○
Check brake filling state according AFM, refill as required.
○
Replace brake fluid.
200h/
2 years