EasyManua.ls Logo

TOMARK Viper SD-4 RTC - Page 47

TOMARK Viper SD-4 RTC
203 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TOMARK, s.r.o.
Airplane Maintenance Manual
Chapter 05 Inspection and Maintenance
Issue: 04.APR 2016 Page 47
Scheduled Inspection
(50 h)
100 h/
annual
as
specified
Avionics
Inspect avionics units and related antennas for security of
installation and condition.
Inspect cables and connectors for attachment.
Inspect microphone and jacks for cleanliness security and
evidence of damage.
Inspect ELT mounting attachment.
Conduct
Magnetic Heading Calibration
of AHARS as per
DYNON AVIONICS SkyView
System Installation Guide
latest
Revision.
1
Follow the
Instructions of Continued Airworthiness
as per
DYNON AVIONICS SkyView
System Installation Guide
latest
Revision.
Check ELT for condition and exp. Date of battery, replace
battery if needed.
Perform radio and transponder check
1
Magnetic Compass
Check magnetic compass for security and cleanliness. Inspect
for leakage and evidence of damage.
Perform magnetic compass compensation.
2
Electrical System (excluding firewall forward)
Inspect electric wiring for proper routing chafing loose or
broken wires/connectors, check attachment.
Inspect circuit breakers and switches for operation and
security.
1
As mandated by local regulations
2
According to country-specific requirements

Table of Contents