10 Installation /uninstallation of the system
ALADDIN is packed for shipping in a double cardboard box on a dedicated pallet with specially shaped
cardboard parts inside to guarantee instrument safety during shipment.
Two special warning labels are applied on the outside of the cardboard box. Please check them as
described below before accepting the instrument consignment, or accept it only with reserve.
If the circle on the label shown below is white, it means that the instrument has been handled without
tipping. If it is red, the instrument may have been damaged during shipping.
If the white rectangle on the label shown above is red in the middle, it means that the instrument may have
been damaged by shock during transport.
Keep the original packaging for future use. The system must always be moved/shipped in its original
packaging, which is specifically designed for damage protection.
10.1 Installing the system
Before installing the system, read the “Safety Instructions” in this manual.
Figure 6 shows the complete packaging of the instrument.
Cut the extensible film and the packing straps. Open the external box, and remove the wood panel as shown
in Figure 7.
To Next Page
Loading...
