Topcon HiPer Lite - Chapter 5 Troubleshooting; Initial Problem Checks

Chapter 5
P/N 7010-0557 www.topconpositioning.com
5-1
Troubleshooting
In general, as long as you follow the maintenance and safety
instructions provided in this manual, you should have few problems
with your receiver. This chapter will help you diagnose and solve
some common problems you may encounter with your receiver.
WARNING
WARNING
Do not attempt to repair equipment yourself. Doing
so will void your warranty and may damage the
hardware.
Check This First
Before contacting TPS Customer support about any problems with
the receiver, try the following:
• First, check all external receiver connections carefully to ensure
correct and secure connections.
• Second, double check for worn or defective cables.
• Next, see the sections below for more specific solutions.
If the problem persists, try the following:
• Reset the receiver using PC-CDU (ToolsReset receiver).
• Restore default settings using PC-CDU (Configuration
Receiver, then click Set all parameters to defaults).
• Clear the NVRAM (see “Clearing the NVRAM” on page 4-18).
• Initialize the file system (click ToolsInitialize file system;
this will erase all files inside the receiver).