Standard Package Contents
P/N 7010-0557 www.topconpositioning.com
1-7
the receiver’s internal memory. This allows the operator to
double check real-time results obtained in the field.
Depending on your options, capabilities of the receiver include:
• Co-Op Tracking
• Multipath reduction
• Wide area augmentation system (WAAS)
• Adjustable phase locked loop (PLL) and delay lock loop
(DLL) parameters
• Dual-frequency static, kinematic, real-time kinematic
(RTK), and differential GPS (DGPS) survey modes
• Auto data logging
• Setting different mask angles
• Setting different survey parameters
• Static or dynamic modes
Standard Package Contents
The HiPer Lite or HiPer Lite+ comes in a real-time kinematic
(RTK) package with two receivers, one as a Base Station and the
other as a Rover Station (also, refer to the re-packaging instruction
card). The contents of this package include:
• Two HiPer Lite or two HiPer Lite+ receivers
•LitePole
• Tripod, tribrach, and adapter
• Topcon Tools™ software (optional)
• Cables, connectors, and adapters
•Literature
To Next Page
