Standard Package Contents
P/N 7010-0557 www.topconpositioning.com
1-9
Power Supply/Charger
The Power Supply/Charger unit (p/n 22-034101-01) is used to
charge the internal batteries when connected to a grounded
outlet; it can also be used as an external power source
(Figure 1-3). This unit converts the alternating current (AC)
normally supplied from an electrical outlet to a direct current
(DC) used to charge the batteries and power the receiver.
• input voltage – between 100 and 240 V AC
• frequency of input power – between 50 Hz and 60 Hz
• output voltage – 12 V DC@2.5 A (30 W)
Figure 1-3. Power Supply/Charger
Software
Standard receiver software includes:
• PC-CDU – controller software that can run on a
Windows-based computer.
• FLoader – Topcon’s firmware loader; available on the
Topcon website.
• BTCONF – Topcon’s Bluetooth® wireless technology
module configuration program; available on the Topcon
website.
• Modem-TPS – Topcon’s Spread Spectrum radio modem
configuration software.
To Next Page
Loading...
