Topcon HiPer Lite - Specifications

Specifications
Topcon HiPer Lite and HiPer Lite+ Operator’s Manual
B-2
Survey Mode
Static
Kinematic (Stop and Go)
RTK (Real-time Kinematic)
DGPS (Differential GPS)
Survey Accuracy
Static, Fast Static For L1+L2 – H: 3mm + 0.5ppm (x baseline length);
V: 5mm + 0.5ppm (x baseline length)
Kinematic, RTK
For L1+ L2 – H: 10mm + 1.0ppm (x baseline length)
;
V: 15mm + 1.0ppm (x baseline length)
Cold Start
Warm Start
Reacquisition
< 60 sec
< 10 sec
< 1 sec
Technology
Co-Op tracking
Low signal tracking
Advanced Multipath mitigation
WAAS
Adjustable PLL and DLL parameters
Radio Link
Frequency 902-928 MHz
Signal structuring Frequency-hopping spread spectrum
Hopping Pattern 5 per band, user-selectable
Hopping channels 128
Occupied bandwidth 100 KHz
Table B-1. Receiver Specifications (Continued)
Component Details