Topcon TRC-NW200 - Page 53

52
INITIAL SETTING
Date display
The date may be displayed on the monitor. When shipped, "ON" (display) is set.
1 Select "DATE" on the "MONITOR DISPLAY" screen and access the
"DATE" display.
2 Press the or and select
"ON" (display) or "OFF" (no display).
3 Press the ; the setting is done and the "MON-
ITOR DISPLAY" screen is reset.
DATE
ON
OFF
FLASH LEVEL SWITCH (+)
FLASH LEVEL SWITCH (
-
)
FLASH LEVEL SWITCH (RESET
)