Toro Field Pro 6040 - Page 111

AdjustingtheTractionSpeed(continued)
g404971
Figure42
1.Setscrew
5.Knob
2.Speedsettingtool
6.Pin
3.T ab(oncontrolrodplate)
7.Adjustmentbracket
4.Controlrod
J.Loosenthefastenerssecuringthecontrolrodtotheadjustmentbracket
andcontrolrodplateslightly.
K.Starttheengineandsetthethrottlecontroltofullspeed.
L.MovethelefthandtractioncontrollevertothefullFORWARDposition.
M.Turnthespeedsettingtoolknobineitherdirectionuntiltheleftrearwheel
rotatesat160RPM.
Note:WhenthetractioncontrolleverismovedtothefullREVERSE
position,therearwheelshouldrotateat80RPM.
N.Releasethetractioncontrolleverandtightenthefastenerssecuringthe
controlrodtotheadjustmentbracketandcontrolrodplate.
O.VerifytheRPMofeachrearwheelintheFORWARDandREVERSEdirection
andadjustifnecessary.
P .Stoptheengineandremovethespeedsettingtool.
9.Testtractioncontroloperationbeforereturningthemachinetoservice.
FieldPro®6040
Page5–45
HydraulicSystem:Adjustments
22267SLRevA