Toro Field Pro 6040 - Towing or Moving the Machine By Hand

TowingorMovingtheMachineByHand
IMPORTANT
Iftowinglimitsareexceeded,severedamagetothehydraulicpumps
andwheelmotorsmayoccur.
Ifitbecomesnecessarytotowormovethemachinebyhand,thetractionpumps
mustbesettobypasshydraulicuid.Movethemachineataspeedbelow4.8
kph(3mph),andforaveryshortdistance.Ifthemachineneedstobemoved
morethan30.5m(100ft),themachineshouldbetransportedonatrailer.
1.Raisethemid-mountattachment
2.Shutofftheengine,removethekey,engagetheparkingbrake,andchock
thewheels.
3.Removetheoptionalrearattachment.
4.Accessthebypassvalvesfromundertherearofthemachine.
IMPORTANT
Donotrotatebypassvalvesmorethan2turns;thispreventsthe
valvesfromfallingoutofthepumpandensuresthathydraulicuid
doesnotspill.
5.Usea5/8inchwrenchtoopenthebypassvalveonthebottomofthehydraulic
pumpbyturningthevalveapproximately2fullturnscounterclockwise.
g406202
Figure18
1.Hydraulicpump,LH2.Hydraulicpump,RH
3.Bypassvalve(2each)
6.Openthebypassvalveontheremaininghydraulicpump.
7.Disengagetheparkingbrakeandmovethemachinetothedesiredlocation.
HydraulicSystem:GeneralInformation
Page5–4
FieldPro®6040
22267SLRevA