Toro Field Pro 6040 - Angle Cylinder (Optional)

AngleCylinder(Optional)
g413856
Figure61
1.Elbowtting(2each)
3.Rearcylinderpin
2.Frontcylinderpin4.Anglecylinder
RemovingtheOptionalAngleCylinder
RefertoFigure61forthisprocedure.
1.Parkthemachineonalevelsurface,lowerthemid-mountattachmenttothe
ground,setthekeyswitchtotheOFFpositionandremovethekeyfrom
theswitch.
2.ReadandadheretotheinformationprovidedinGeneralPrecautionsfor
RemovingandInstallingtheHydraulicSystemComponents(page5–46).
3.Cleantheareaaroundthehydraulichoseandttingconnections.
4.Disconnectthehydraulichosesfromtheanglecylinder.Caporplugthe
disconnectedhydraulichosesandttingtopreventhydraulicsystem
contamination.
5.Removethefrontandrearcylinderpinsandremovetheanglecylinderfrom
themachine.
6.Ifnecessary,recordthelocationsandorientationsofthettingsforassembly
purposesthenremovethehydraulicttingsfromthecylinder.
7.RemoveanddiscardalltheO-ringsfromthehydraulichoses,andttings
thatweredisconnectedorremoved.
InstallingtheOptionalAngleCylinder
RefertoFigure61forthisprocedure.
FieldPro®6040
Page5–89
HydraulicSystem:ServiceandRepairs
22267SLRevA