Toro Field Pro 6040 - Servicing the Rear Lift Cylinder

ServicingtheRearLiftCylinder
g412561
Figure60
1.Barrelassembly
6.O-ring11.O-ring
2.Shaftassembly
7.Backupring12.Retainingring
3.Piston8.Pistonseal
13.Greasetting
4.Locknut
9.BSseal
5.Head10.Dustseal
DisassemblingtheCylinder
RefertoFigure60forthisprocedure.
1.Removethehydraulicuidfromthecylinderintoadrainpanbyslowly
pumpingthecylindershaft.Plugbothportsandcleantheoutsideofthe
cylinder.
IMPORTANT
Preventdamagewhenclampingthecylinderinavise;clampon
theclevisonly.
2.Mountthecylindersecurelyinavisebyclampingontheclevisendofthe
barrel.Useofavisewithsoftjawsisrecommended.
3.Loosentheheadfromthebarrel:
A.Useaspannerwrenchtorotateheadclockwiseuntiltheedgeofthe
retainingringappearsinthebarrelopening.
HydraulicSystem:ServiceandRepairs
Page5–86
FieldPro®6040
22267SLRevA