Toro Field Pro 6040 - Center Lift Cylinder

CenterLiftCylinder
g413438
Figure57
1.Liftcylinder3.Elbowtting
5.Frontcylinderpin
2.Straighttting
4.Rearcylinderpin
RemovingtheCenterLiftCylinder
RefertoFigure57forthisprocedure.
1.Removethemid-mountattachmentstopassemblyfromthemachine;referto
RemovingtheMid-MountAttachmentStop(page7–15).
2.ReadandadheretotheinformationprovidedinGeneralPrecautionsfor
RemovingandInstallingtheHydraulicSystemComponents(page5–46).
3.Cleantheareaaroundthehydraulichoseandttingconnections.
4.Disconnectthehydraulichosesfromtheliftcylinder.Caporplugthe
disconnectedhydraulichosesandttingtopreventhydraulicsystem
contamination.
5.Removethefrontandrearcylinderpinsandremovetheliftcylinderform
themachine.
6.Ifnecessary,recordthelocationsandorientationsofthettingsforassembly
purposesthenremovethehydraulicttingsfromthecylinder.
7.RemoveanddiscardalltheO-ringsfromthehydraulichoses,andttings
thatweredisconnectedorremoved.
InstallingtheCenterLiftCylinder
RefertoFigure57forthisprocedure.
FieldPro®6040
Page5–79
HydraulicSystem:ServiceandRepairs
22267SLRevA