Toro Field Pro 6040 - Page 122

ChargingtheHydraulicSystem(continued)
11.Lowerthemachinetotheground.
12.Operatethemachinebygraduallyincreasingitsworkloadtofullovera10
minuteperiod.
13.Stopthemachine,checkthehydrauliccomponentsforleaksandtighten
anylooseconnections.
14.Checkandadjusttheuidlevelinthehydraulicreservoirifnecessary;refer
tothetractionunitOperator’sManual.
Note:Ifnewuidshowsanysignsofcontamination,ushthehydraulic
systemagainuntiltheuidisclean;refertoFlushingtheHydraulicSystem
(page5–49).
HydraulicSystem:ServiceandRepairs
Page5–56
FieldPro®6040
22267SLRevA