Toro Field Pro 6040 - Page 126

RemovingtheHydraulicFluidCooler(continued)
9.Inspectthefoamsealsforwearordamageandreplacethemifnecessary.
InstallingtheHydraulicFluidCooler
RefertoFigure46forthisprocedure.
1.Ifpreviouslyremoved,installthehydraulicttingstotheuidcooler;refer
toInstallingtheHydraulicFittings(SAEStraightThreadO-RingFittings)
(page5–10).
2.Attachthecoolertothefanshroud.Compresstherubberclampstosecure
thecooler.
3.Connectthepreviouslyremovedhydraulichoses;refertoInstallingHydraulic
HosesandTubes(O-RingFaceSealFitting)(page5–8).
4.Securethecoolercovertothefanshroudwiththepreviouslyremoved
fasteners.
5.Securethebottomofthecoolerassemblytothemachineframewiththe
previouslyremovedfasteners.
6.Fillthehydraulicreservoirwiththeappropriatehydraulicuid;refertothe
tractionunitOperator’sManual.
7.Operatethemachineandcheckforleaks.
8.Installtheoperator’scushionbeforereturningthemachinetoservice.
HydraulicSystem:ServiceandRepairs
Page5–60
FieldPro®6040
22267SLRevA