Toro Field Pro 6040 - Page 209

InstallingtheParkingBrakeLinkage(continued)
g414697
Figure85
TurnbuckleAssembly
1.Verifythelengthofeachturnbucklepriortoassembly.Eachturnbuckle
shouldmeasure284to289mm(11.2to11.4inch).
2.Ifpreviouslyremoved,installthebellcranksandturnbucklestothewheel
motors.
3.Installthebrakeshaft,angebearings,andswitchplate.Ensurethebrake
shaftdepressestheparkingbrakeswitchwhenmovedtothefullydisengaged
(forward)position.
4.Installeachbrakelinkbypassingthelowerendofthebrakelinkthroughthe
trunionpininthebellcrank,thensecurethebrakelinktothebrakeshaftwith
thepreviouslyremovedfasteners.
5.Installthecompressionspringandangenuttothebottomofeachbrakelink.
6.Adjusttheparkingbrakelinkage;refertoAdjustingtheParkingBrake
Linkage(page7–3).
FieldPro®6040
Page7–11
Chassis:ServiceandRepairs
22267SLRevA